Part Number Hot Search : 
BTA12 BCR42PN CTC2F 2N3906 D401A CSD0106 CTC2F D401A
Product Description
Full Text Search
 

To Download PLL130-05SI Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 PLL130-05
High Speed Translator Buffer to PECL (Enable Low) FEATURES * * * * * Differential PECL output Single AC coupled input (min. 100mV swing). Input range from DC to 1.0 GHz. 2.5V to 3.3V operation. Available in 3x3mm QFN.
GND GND GND
PIN CONFIGURATION
(TOP VIEW)
GND
9
VDD
11
VDD
13 14 15 16
12
VDD
10
8 7 6 5
PECL_BAR VDD PECL GND
PLL130-05
1 2 3 4
DESCRIPTION The PLL130-05 is a low cost, high performance, high speed, buffer that reproduces any input frequency from DC to 1.3GHz. It provides one pair of differential PECL outputs. Any input signal with at least 100mV swing can be used as reference signal. This chip is ideal for conversion from sine wave, TTL, CMOS, or LVDS to PECL.
OE
V
REF_IN
GND
GND
Note: V denotes internal pull down
BLOCK DIAGRAM
REF_IN
Input
PECL_BAR PECL
Amplifier
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 09/09/04 Page 1
GND
PLL130-05
High Speed Translator Buffer to PECL (Enable Low) PIN DESCRIPTIONS
Name
GND VDD REF_IN PECL PECL_BAR OE
3x3mm QFN Pin number
1,2,4,5, 9,13,14,15 7,10,11,12 3 6 8 16
Type
P P I O O I Ground.
Description
Power supply. Reference input signal. The frequency of this signal will be reproduced at the output (after translation to PECL level). PECL True output. PECL Complementary output. Output enable (`0' for enable). Internal pull-down (default is `0').
ELECTRICAL SPECIFICATIONS
1. Absolute Maximum Ratings PARAMETERS
Supply Voltage Input Voltage, dc Output Voltage, dc Storage Temperature Ambient Operating Temperature* Junction Temperature Lead Temperature (soldering, 10s) ESD Protection, Human Body Model
SYMBOL
VDD VI VO TS TA TJ
MIN.
-0.5 -0.5 -65 -40
MAX.
4.6 VDD+0.5 VDD+0.5 150 85 125 260 2
UNITS
V V V C C C C kV
Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permanent damage to the device and affect product reliability. These conditions represent a stress rating only, and functional operations of the device at these or any other conditions above the operational limits noted in this specification is not implied. * Note: Operating Temperature is guaranteed by design for all parts (COMMERCIAL and INDUSTRIAL), but tested for COMMERCIAL grade only.
2. AC Specification PARAMETERS
Input Frequency Input signal swing Output Frequency Output Rise Time Output Fall Time
CONDITIONS
REF_IN input 0.8V to 2.0V with no load 2.0V to 0.8V with no load
MIN.
0 100 0
TYP.
MAX.
1000 1000 1.5 1.5
UNITS
MHz mV MHz ns ns
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 09/09/04 Page 2
PLL130-05
High Speed Translator Buffer to PECL (Enable Low)
3. PECL Electrical Characteristics PARAMETERS
Output High Voltage Output Low Voltage
SYMBOL
VOH VOL
CONDITIONS
RL = 50 to (VDD - 2V) (see figure)
MIN.
VDD - 1.025
MAX.
VDD - 1.620
UNITS
V V
4. PECL Switching Characteristics PARAMETERS
Clock Rise Time Clock Fall Time
SYMBOL
tr tf
CONDITIONS
@20/80% - PECL @80/20% - PECL
MIN.
TYP.
0.6 0.5
MAX.
1.5 1.5
UNITS
ns ns
PECL Levels Test Circuit
OUT VDD OUT
PECL Output Skew
50
2.0V 50%
50 OUT OUT tSKEW
PECL Transistion Time Waveform
DUTY CYCLE
45 - 55%
55 - 45%
OUT 80% 50% 20% OUT tR tF
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 09/09/04 Page 3
PLL130-05
High Speed Translator Buffer to PECL (Enable Low)
PACKAGE INFORMATION
ORDERING INFORMATION
For part ordering, please contact our Sales Department:
47745 Fremont Blvd., Fremont, CA 94538, USA Tel: (510) 492-0990 Fax: (510) 492-0991
PART NUMBER
The order number for this device is a combination of the following: Device number, Package type and Operating temperature range
PLL130-05 S C
PART NUMBER TEMPERATURE C=COMMERCIAL I=INDUSTRAL PACKAGE TYPE Q=QFN
Order Number PLL130-05QC-R PLL130-05QC
Marking P130-05QC P130-05QC
Package Option QFN - Tape and Reel QFN - Tube
PhaseLink Corporation, reserves the right to make changes in its products or specifications, or both at any time without notice. The information furnished by Phaselink is believed to be accurate and reliable. However, PhaseLink makes no guarantee or warranty concerning the accuracy of said information and shall not be responsible for any loss or damage of whatever nature resulting from the use of, or reliance upon this product. LIFE SUPPORT POLICY: PhaseLink's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President of PhaseLink Corporation.
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 09/09/04 Page 4


▲Up To Search▲   

 
Price & Availability of PLL130-05SI

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X